Air Conditioning

Our company offers the following kinds of products: – Brackets for air conditioners that are of high quality welding and assembly of its own production – Copper pipe in a wide range of American Manufacturer Mueller – Copper tube – mini-pumps are sauermann for condensate removal – Equipment for Professionals from the firm ridgid – Various equipment for servicing of refrigeration and air conditioning company on wigam – Wide choice of refrigerant Freon – Large range expanders – When installing the copper pipe in cold water for a capillary-gap brazing alloys best suited brazetec. Installation of refrigeration systems, air conditioning and oil lines is best done with the help of brazing alloys. Do not contain cadmium in its core solder BrazeTec, guarantee a high seal strength. The use of solder BrazeTec available for all operating temperatures from – 200 C to 200 C. Alloys, whose composition does not include zinc, are particularly well suited for dynamic loads that arise during the operation. – The problem of the condensate, which occurs when using any cooling the device is correct at the moment. When the air conditioner in cooling mode, the air located in the refrigerated room condenses on the evaporator in the form of moisture, which then flows along the edges exchanger in a special tray. Most often, to remove the accumulating moisture condensation in the sump by gravity out through the drain hose. However, there are cases where the installation conditions do not provide opportunity to leave the condensate pan by gravity. In such cases we use the drainage pump.